How to compress a PDF without making it unreadable
Most of a PDF's weight is pictures. Understand where the size comes from and you can shrink a file with the least damage, and know when a target such as 100 KB is realistic.
Where the size of a PDF comes from
A PDF made from a word processor, with only text, is often tiny: a few pages can be well under 100 KB. Size explodes when pages contain images. A photo or a scanned page is one large picture, and a ten-page scan can be many megabytes even though it looks like a simple text document.
So the useful question is not how to squeeze the file but what is inside it. Mostly text means there is little to save. Mostly scans means the savings come from the images, and every saving costs some sharpness.
What the compression levels actually do
The Compress PDF tool has three levels, which show the typical trade-off:
- No quality loss reorganises and compresses the file structure and does not touch images. Safe, but the saving is usually modest.
- Balanced also shrinks JPEG images to medium-high quality and at most 2000 pixels per side. It is the best first try.
- Maximum reduction goes to medium quality and 1400 pixels. This can be visible in photos and scans, and is what you use when a hard limit forces your hand.
Only JPEG images inside the PDF are shrunk. Drawn text and other image types are kept as they are. A PDF that was already optimised may barely change, and an honest tool says so instead of handing you a file that is the same size.
A sensible order of attack
- Remove what you do not need. Use Split PDF to drop blank pages, covers and duplicates. This saves the most with no loss in quality.
- Try Balanced. Check the new size and zoom in on a page to judge readability.
- Go to Maximum reduction only if needed. Check small print, stamps and signatures.
- Keep the original in case you need full quality later.
A digitally signed PDF loses its signature in a compressed copy, so do not compress a document whose signature must stay valid. Compress before signing instead.
Reaching 100 KB or 200 KB
Portals often set limits such as 50, 100, 200 or 500 KB. Whether you can reach one depends on the content:
| Content | Realistic at 100 KB? |
|---|---|
| A few pages of text from a word processor | Usually yes, often with room to spare |
| One or two scanned pages, scanned at modest resolution | Often, on a strong setting |
| Many scanned pages or colour photos | Rarely. Fewer pages or a lower scan resolution will do more than compressing again |
The pages for 100 KB and 200 KB start on the strongest level and report the real size reached. Leave a small margin: a file of 96 KB passes whether a website counts a kilobyte as 1,000 or 1,024 bytes, while 100.5 KB may not.
If the file will not get small enough
- Rescan at a lower resolution. 150 DPI is enough for readable text, and 300 DPI makes files far larger than a form needs.
- Scan in black and white if colour carries no meaning, such as for a printed letter.
- Build the PDF from small images. JPG to PDF is more effective than squeezing a finished heavy file.
- Compress the images first with the Image Compressor and then make the PDF.
No tool can promise an exact percentage. What you can rely on is a tool that shows the real before-and-after size and lets you decide.
How to judge the quality after compressing
The file size tells you the saving, but only your eyes can tell whether the result is still usable. Check it the way the recipient will read it.
- Zoom to 100 percent and read a paragraph of the smallest text. If you have to squint, the compression was too strong.
- Look at numbers and codes. Account numbers, dates, ID digits and amounts must be unmistakable. A 6 that looks like an 8 is a real problem.
- Check stamps, seals and signatures. Fine lines are the first thing to blur.
- Open it on a phone. Many reviewers read on a small screen, where blur is more obvious.
- Compare with the original on the same page, side by side.
If the result fails the test, go back one level, from Maximum reduction to Balanced, and look for savings somewhere else: fewer pages, a lower scan resolution or removing the document metadata the tool offers to strip. Remember that a digitally signed document loses its signature in the compressed copy, so keep the signed original for any purpose where the signature must remain valid.
Frequently asked questions
Why is my scanned PDF so big?
Each scanned page is one large picture, and pictures are the heavy part of a PDF. Scan at a lower resolution or in black and white if colour is not needed.
Will compression make my PDF blurry?
The no-quality-loss level does not touch images. Balanced and maximum reduction lower the quality of JPEG images, and the strongest level can be visible in photos and scans.
Why did my PDF not get smaller?
It may already be optimised, or most of its size may be in images that are not JPEG. A good tool reports this instead of giving you a same-sized file.
Does compressing remove the text?
No. Text stays as text. Only images inside the file are re-encoded at a lower quality.
More guides
- How to turn photos into a small PDF for uploading
- How to extract text from an image (OCR) and get accurate results
- Preparing a document before converting it to PDF
- How to merge PDF files into one, in the right order
- All guides
Paul Digital guides are written from hands-on testing of the tools on this site and are reviewed when platforms or formats change. Requirements set by exam boards, governments and apps vary and change over time, so always check the official instructions for your case. Spotted an error? Email askpaulonline@gmail.com.